Around the House

My wooden spoons and cutting boards needed some attention. I sanded the spoons by hand (shown) and rubbed them down with board cream - a mix of beeswax and mineral spirits.

This should keep them from drying out and cracking. They were starting to look pretty neglected..especially the two on the far right. Couldn't believe the difference this made - the cutting boards look totally different too! (no pictures of the boards, yet)

The morning of the Fourth of July, we went to the annual antique market in Solon, Iowa. The only thing I found (that I had been wanting AND that I could afford) was this crock..perfect size for my wooden kitchen stuff!

Office with a fresh coat of "Greyhound" paint. Still more trim over the door top and across the bottom of the built in bookshelf. The library ladder is still in the "someday" category.

Pretty sweet setup: computer with speakers feeds the floor speakers and the surround sound in the living room. Party! Still looking for the right stand for the receiver/BluRay, but it will come.

I had a few friends over and actually cleaned the house..INCLUDING the floors! The place doesn't look too bad! There's a home-grown cucumber in that wooden bowl..I think I've got, like..45 more on the way. :S

Kitchen Cabinets

We’ve been working on a pretty big project for the last few weeks. Actually, we’ve been actively working on it for the last week and a half or so.  The rest has been mostly mental work..strategy and such. We made big progress this weekend, though!

The big project I’m referring to is cabinetry. Kitchen cabinetry. We’ve been pretty methodical about it, and we’re seeing light at the end of the tunnel! In all honesty, I don’t think it’s taken a terribly long time given the number of steps it takes to convert a sheet of material into the container I trust to hold my food, but Dad has been worrying about this for a while. This project is kind of his baby and he doesn’t want to mess it up.

Understandably so.

In the past, he worked with a custom cabinet maker on the side, so he’s got an idea of how it should work. That said, when he worked for this guy, Dad didn’t draw up the plans or install the cabinets once they were finished. So..he’s worried.

I’m not. We’ll be fine. We’re taking our time for a reason. The old ‘measure twice, cut once’ thing? We’re doing that, and usually having a conversation about each cut before, during, and after making it. If the cabinets are messed up, it’s our fault..not his. I suppose another good thing about building your own cabinets is that if they don’t fit you can make one that does. But what a pain that would be..

Anyway, here are a few pictures of our organized chaos in the garage. The cabinets in these pictures are the base units – since these shots were taken, those have all been primed and painted with a sprayer and stored in the enclosed porch until we’re ready for them. In the meantime, we’ve cut, primed and painted the pieces for the upper cabinets and should start assembling those in the next few days, or as his work schedule allows.

As I said, organized chaos.

Base cabinet boxes assembled, working on their face frames.

Cabinet with face frame. This will have a swing door..I think this size cabinet goes on either side of the oven.

Sanding the face frame for the cabinets with drawers. Very cool!

We’ll hang the uppers first, and then set the base cabinets – they’re easier to install that way. Once everything is set, we can measure for cabinet doors and counter tops, which I look forward to learning how to make out of concrete J

Wish us luck!

Floor sander, why do you hate me?

Well, the disc-style sander (You know, the one that looked like a floor waxer?) was horrible! Which was really frustrating because so many people had used it successfully and even recommended it. My only guess is that there was some kind of finish on the floor that just didn’t agree with the sandpaper. With the age of the floors, it’s possible there were several layers of finish that didn’t agree with the sandpaper, but oh well. The roommates and I tried our best and stayed late into the night, but our results didn’t come close to matching our efforts.

Another option might have been a chemical stripper – this would have taken the finish(es) and gone about its business. Stripping the floor also would have “saved” the wood, because every time you sand a floor you take away a little bit.. sometimes up to ¼” per sanding. I didn’t like the idea of using a stripper, though. The chemicals are harsh and generally not good for you. Not to mention, cleaning up the stripper is sometimes, itself, a pretty big task.

So, just shy of driving off to the carpet store and scrapping the whole idea, we decided to try a different style sander from a different store. This sander was the older-style belt sander that I’ve heard so many horror stories about (“It’s too fast!” “It gouges the floor!” “It’s so dusty you can’t see!”), but I wanted something that would kick the floor’s ass and this thing did it. Not only was it aggressive enough with the finish, it wasn’t as bad as everyone said. You did have to hang onto it, but it wouldn’t drag you behind it like in the horror stories; it would really only gouge the floor if you weren’t paying attention or if you hit a spot that was significantly higher than another; and this model had a vacuum attachment like the other, so the dust was minimal. We had the floors completely sanded in a day! The better part of a day, but a day nonetheless. There are a few spots I’d like to hit with a finish sander, but all in all, we’re in good shape.

Wood floors in the living room. Leaning toward leaving them a lighter color - any thoughts?

There was also an edge tool that would take care of the area closest to the walls, door openings, or registers where the larger sander couldn’t reach. Everyone pretty much agreed that, while it did the job, it was just too heavy to use for any length of time. We’ve loaded up a handheld belt sander with the appropriate grit and it seems to take care of the edges without too much of a problem.

The other thing our “licensed electrician” (wink) has been working on is light fixtures! There are quite a few of them..or at least it seems that way when your arms are above your head all afternoon. Some of them installed without much of a problem, and some did not. Because the ones we are currently working on came from IKEA, many of them didn’t come with all the parts we need to hang them properly. So, you take the good with the bad with IKEA – super affordable, nice design, never have all the parts J

Close, but no cigar. We need all the parts, IKEA!

With the lights, we’re working on installing the rest of the outlets and switches. The outlets aren’t presenting a problem.. the fact that I’d like to have dimmer switches is. Especially where there are three way switches. If anyone has any ideas about this, feel free to chime in and I’ll pass it along!

Pendant over the kitchen sink.

Progress, progress! Every day!

Just when you think you're past it..

..you get to rip out more plaster.

When my (original) drywall contractor came to give an estimate, he recommended tearing out some of the plaster around the window in the living room. As I’ve mentioned, I wasn’t wild about tearing anything out there because I didn’t want it to mess with the window or the trim work around it.

He explained that he can patch the plaster that’s there…but it was essentially rotten and would flake off in a short time anyway. The best thing for me to do would be to determine what plaster was loose (tap the wall…does it wiggle? Yes. Grab a hammer.) and remove it. Dad/roommate and I tried to be selective at first, but it became pretty apparent that once we started, it was really better to keep going. Hopefully now I won’t have *major* issues with cracking or chipping now.

Ugh..dust. We actually ended up ripping out more than this...just for kicks.

When I say “original” drywall contractor, that’s a little misleading. My original bid was a local guy, has a great reputation for doing great work..$2,700..little expensive. Enter: guy from Des Moines. “Oh, yeah, sure..I can do it for $2,000..and start Friday!” Long story short: too good to be true. He inexplicably called my mom the Monday after he should have been there and indicated that he was “just swamped, and wouldn’t be able to do it.”

Mom’s stock rose in my book that day: she hung up on him.

So, in addition to prepping for finished drywall, we’ve been prepping for finished hardwood! I went to a local home store and rented a walk-behind floor sander. I had heard horror stories about the old belt sander models that you had to run behind to keep from gauging the floor, and even then you’ll probably start a fire. The model I got has three sandpaper discs stuck to the underside of – what looks like – something you might use to buff a gym floor with. And it has a nice little vacuum attached so there isn’t dust billowing out like the old models.

So I rented my machine, bought some sandpaper, put on my glasses and mask and got to work. I found out really quickly that I didn’t need the glasses or mask – there was virtually no dust. I also found out really quickly that I was done sanding. Not in the “I-finished-sanding” way, but in the “this-sandpaper-is-so-full-of-crap-it-can’t-function-anymore” sort of way. So, I peeled the pads off and stuck new ones on. Same story. I’d sand for about two feet with no problem – down to the bare wood! And then, kabluey..no sand for you. We tried a couple different techniques before deciding that, at $3 per disc x 3 discs per 2 square feet of floor, this was going to be the most expensive project ever undertaken by man.

Entry floor in various stages of stainlessness.

We asked my neighbors who had, incidentally, just recently redone their floors. It turns out they ran into the same problem. They suggested cleaning the floors thoroughly with Mineral Spirits before we went any further. And that’s as far as we’ve gotten..Drywall guy – the saint that he is for coming back after I snubbed him for the jack wagon from Des Moines – has first dibs on the space.

In other progress news: the siding is done!*

*for the year.

We actually ran out of siding for the very top part of the back of the garage. Our logic is: it’s covered in Tyvek, it’s not living space, and it will be fine. I don’t consider running 20 pieces short of siding to be such a bad guess. After all, I did the math on a scrap of paper using measurements I was only half sure about (if not making up entirely).

The house itself is completely wrapped in siding, though. Some new, some old, but the rest will come – along with new windows – next year.