Superbase

This weekend was the last I’ll see of the dogs for a while. The parents made it back from Texas late Friday night, and took the dogs Saturday afternoon. I took lunch over to their place and we got a game plan for the weekend.

My little carpentry project last weekend: lining the closet with wood, hanging shelves, and painting. One or two more coats should do it..the roommate got antsy to move her things back in..

Dad and I decided we’d like to get started hanging the baseboard. And while the thought was nice, the execution was going to drive me crazy.

For a while now, every time I’ve gone to look for something it has miraculously gone missing... either because I’m a crazy person or because everyone puts things in a different place when they’re done. So, rather than wander the house for an hour looking for tape measures and things like that, we decided to clean and organize the garage as it has needed it for quite a while.

You can tell we cleaned, right?

Believe me, it's so much better than it was!

We finished up with that project and had dinner at my place. Take-out = no dishes.

Sunday morning, I got the chance to work on my surround sound system a bit. I ordered a system through our local Radio Shack and it came in! I started putzing around with it Friday on my lunch break, but quickly decided that I was probably going to need to focus on this project for longer than the extra 25 minutes I had at the time. In addition to the speakers, I bought a kit that will mount each unit to the ceiling and orient the speakers so the sound hits me in the teeth while I’m sitting on the couch J

Tiny rear surround speaker. It rocks :)

We had computer speakers rigged up to the TV for sound. Shouldn't need those anymore!

Dad stopped over just in time to lend a hand with this project and it went together pretty smoothly.

After that, we got to work on the baseboard. After messing with the table saw for a bit, we got to work and got quite a bit done considering we were sort of learning as we went along.

This is what we were up against..

Because the floors slope toward the front of the house (remember, my “greenhouse” was originally a porch.. and the floor still sheds water!), we thought for a while about the best way to hang the baseboard. I decided that I’d like the trim to be at the same level all the way through the house. Whether that’s the easy way to do it or the hard way, I don’t know.. Anyway, I bought 8” and 10” baseboard so that we would have plenty of excess board when scribing it to the variations in the floor.

We still need to lay some quarter-round along the bottom to hide any gaps, but it already looks so much better!

We got to the point where we’ll have to switch over to the 10” boards before calling it a night. More work on this tonight, I imagine.

One corner hung, waiting for holes to be filled and sanded. See the need for quarter-round here?

And you can see the floor sinking slightly here. The closer you get to the front door, the more the floor drops. We've got taller boards to make up the difference.

As I write this, Dad is on his way to the store to pick up materials for cabinet-making! We measured everything before he left for Texas, and once the baseboard is hung, we should have room in the garage to build a few boxes. Pictures and posts to follow…wish us luck! J

This is what the door/drawer fronts should look like (we hope!) when done. They'll be painted the same white as the trim, door jambs, and fireplace brick. Again, wish us luck :)

Floor sander, why do you hate me?

Well, the disc-style sander (You know, the one that looked like a floor waxer?) was horrible! Which was really frustrating because so many people had used it successfully and even recommended it. My only guess is that there was some kind of finish on the floor that just didn’t agree with the sandpaper. With the age of the floors, it’s possible there were several layers of finish that didn’t agree with the sandpaper, but oh well. The roommates and I tried our best and stayed late into the night, but our results didn’t come close to matching our efforts.

Another option might have been a chemical stripper – this would have taken the finish(es) and gone about its business. Stripping the floor also would have “saved” the wood, because every time you sand a floor you take away a little bit.. sometimes up to ¼” per sanding. I didn’t like the idea of using a stripper, though. The chemicals are harsh and generally not good for you. Not to mention, cleaning up the stripper is sometimes, itself, a pretty big task.

So, just shy of driving off to the carpet store and scrapping the whole idea, we decided to try a different style sander from a different store. This sander was the older-style belt sander that I’ve heard so many horror stories about (“It’s too fast!” “It gouges the floor!” “It’s so dusty you can’t see!”), but I wanted something that would kick the floor’s ass and this thing did it. Not only was it aggressive enough with the finish, it wasn’t as bad as everyone said. You did have to hang onto it, but it wouldn’t drag you behind it like in the horror stories; it would really only gouge the floor if you weren’t paying attention or if you hit a spot that was significantly higher than another; and this model had a vacuum attachment like the other, so the dust was minimal. We had the floors completely sanded in a day! The better part of a day, but a day nonetheless. There are a few spots I’d like to hit with a finish sander, but all in all, we’re in good shape.

Wood floors in the living room. Leaning toward leaving them a lighter color - any thoughts?

There was also an edge tool that would take care of the area closest to the walls, door openings, or registers where the larger sander couldn’t reach. Everyone pretty much agreed that, while it did the job, it was just too heavy to use for any length of time. We’ve loaded up a handheld belt sander with the appropriate grit and it seems to take care of the edges without too much of a problem.

The other thing our “licensed electrician” (wink) has been working on is light fixtures! There are quite a few of them..or at least it seems that way when your arms are above your head all afternoon. Some of them installed without much of a problem, and some did not. Because the ones we are currently working on came from IKEA, many of them didn’t come with all the parts we need to hang them properly. So, you take the good with the bad with IKEA – super affordable, nice design, never have all the parts J

Close, but no cigar. We need all the parts, IKEA!

With the lights, we’re working on installing the rest of the outlets and switches. The outlets aren’t presenting a problem.. the fact that I’d like to have dimmer switches is. Especially where there are three way switches. If anyone has any ideas about this, feel free to chime in and I’ll pass it along!

Pendant over the kitchen sink.

Progress, progress! Every day!

I fall down enough without help.

A few weeks ago, when we were really getting into building walls and prepping everything for electrical and plumbing work, we decided to level up the floor in my bedroom.

The floor in the bedroom itself was not out of level, but there was a pretty good drop off between the kitchen and the bedroom and the floor in the original closet sloped quite a bit.

The drop off between bedroom and kitchen. This is where I fall on my face.

As we tore out the old walls and removed the old ceiling, we found the area that was used as a closet was originally part of the laundry room, which, again, was originally a porch. In an effort to help the porch floor shed water it was sloped toward the backyard. When the porch was later enclosed and that space annexed for the master closet, the floor was left as is.

All of this wouldn’t have been a problem, had we not moved the closet.

We moved the closet for a few reasons. First, and most importantly: the door to the bedroom was small in height and width. We wouldn’t be able to do anything about the width because of the adjacent pocket door to the bathroom and a sewer vent pipe running up through the wall on the other side of the bedroom door opening.

Small bedroom door to the left. New opening is just to the right of the old opening.

Because of these challenges, we elected to move the door to the “fridge wall” in the kitchen – this will afford me a larger door while allowing the vent to remain in place, but you would then enter into what used to be the closet. So, we moved the closet over to where the bedroom door was originally and provided an additional buffer between the bathroom and the bedroom. Now, I won’t hear guests singing in the shower while I’m trying to sleep AND I’ll be able to move furniture in and out of my bedroom (without tripping!) much easier than before.

Leveling the floor:

We could only do this in good conscience because the floor was in solid shape. If there were settling or rot issues, the right thing to do would have been to remove the floor entirely and deal with those issues appropriately.

Notice how thick the strip is here..

..and here. In roughly 8', the floor dropped almost two inches in the old closet.

Using a level, find the highest and lowest points in the room. Starting from the high point, establish a level point using shims, furring strips, or two-by-fours depending on how out of level you are. As you progress across the floor toward your low point, the strips will get thicker, so take that into account when establishing your high point/first row. Secure those pieces to the floor using construction adhesive and screws to minimize future squeaking. From there, it’s as simple as ensuring that each strip is level in its own right, but also level with the surrounding strips.

I feel bad about covering these floors..

It probably sounds complicated because I’m horrible at explaining things like this without talking with my hands. I promise, it’s simple. Once you’ve got your mind wrapped around it, it goes pretty quickly.

From there, we used ¾” tongue and groove plywood to provide more rigidity to the floor while also helping bring the bedroom floor into level with the kitchen floor at the new threshold we had created. The plywood was glued and screwed into the strips – again for rigidity and to eliminate future squeaking.

Vent pipe (center) with the new doorway to the right.

Good to go!

Once this is done, lay your level down, watch the bubble, and drink a beer to celebrate your accomplishment! Once your beer is finished, you’re ready for dancing on your new floor J